Single component 100% acrylic waterproofing and heat reflective coating which is formulated with hollow core ceramic microspheres to dissipate and reflect solar radiation and also provide a long lasting elastomeric waterproof coating.
Elastoclad HR may be used on metal roof decks, silos, storage tanks, cold storage facilities, metal wall surfaces and electrical equipment boxes, concrete roofs and walls. Suitable surfaces to apply to include concrete, metals, timber, asbestos cement and brickwork.
Elastoclad HR may be applied using a brush, roller or airless spray. In some circumstances, particularly if applying by airless spray equipment, the viscosity of Elastoclad HR may warrant Elastoclad HR the addition of 5-10% of water for improved spray viscosity.
Crony Electronics Pvt Ltd is involved into energy saving products & activities since 1993. We have strived for performance & optimum output for our customers ever since. Energy saving product for Air conditioners were the first to be introduced by us in 1994.
As a mark of excellence in our field the company has grown leaps & bounds. This is proven by the fact that we cater to the likes of ONGC, Railways, L&T, M&M, Patni Computers, Kirloskar Brothers Ltd, Hindalco, Sesa Goa & so on. Our wings are spread across all the geographical regions of India.
Our continuous efforts as a team in first of its kind microprocessor based digital energy saving product for AC way back in 1997. The product still runs as a favourite in the scenario of changing technologies goes to prove its efficiency, reliability & performance for more than 2 Decades now.
We measured the surface to surface temperature difference on the coated and the uncoated surface with our thermography machine (flir make). We were delighted to witness a difference of 8 to 10 deg. Celsius surface to surface. The end result on the floor at a distance of 30 feet was found to be very comfortable as well.
We donot feel the need of AC after application of this coating. The coating is still effective after 6 years of application. We recommend & encourage use of this coating for heat reflective, waterproofing & safeguarding the exterior surface from degrading.
8-10 DEGREES OF TEMPERATURE DIFFERENCE
EFFECTIVE EVEN AFTER 6 YEARS OF APPLICATION
NO NEED OF AC AFTER APPLICATION OF THIS COATING
Substantial drop of temperature notice which are equivalent to 80 tr refrigeration load followed by power consumption reduced around 3000KVA per day, measured on same scale.
This coating solution found to be very effective, and results establised are even much better than anticipated by the applicator.
This is a better methodology for water proofing as well thermal insulation.
SUBSTANTIAL DROP OF TEMPERATURE NOTICED, EQUIVALENT TO 80 TR REFRIGERATION LOAD.
POWER CONSUMPTION REDUCED AROUND - 3000 KVA PER DAY
3000KVA POWER = 3000 X 0.79 KG EMM.OF CO2 SAVING 2370 KG OF CO2 EMM.PER. DAY
We had verified the temperature in May 2018 which is after 2 years of application. We have observed an ambient temperature reading of 47.7 deg. Celciusabove the roof. The temperature inside the ware house at 5 feet above ground level was observed at 39 deg. Celcius. A clear difference of approximately 9 deg. Celsius.
We find the product very useful & recommend it to be used for better work conditions & higher productivity.
EVEN 2 YEARS AFTER APPLICATION , APPROXIMATELY 9 DEGREE CELSIUS DROP INSIDE THE SHED AS COMPARED AMBIENT TEMPERATURE WAS OBSERVED